Template:Western Digital SMART attributes
| ID | Name |
|---|---|
| 0x01/1 | Read Error Rate |
| 0x03/3 | Spin-Up Time |
| 0x04/4 | Start/Stop Count |
| 0x05/5 | Reallocated Sectors Count |
| 0x07/7 | Seek Error Rate |
| 0x09/9 | Power-On Hours |
| 0x0A/10 | Spin Retry Count |
| 0x0B/11 | Recalibration Retries |
| 0x0C/12 | Power Cycle Count |
| 0xC0/192 | Power-off Retract Count |
| 0xC1/193 | Load/Unload Cycle Count |
| 0xC2/194 | Temperature |
| 0xC4/196 | Reallocation Event Count |
| 0xC5/197 | Current Pending Sector Count |
| 0xC6/198 | Uncorrectable Sector Count |
| 0xC7/199 | UltraDMA CRC Error Count |
| 0xC8/200 | Write Error Rate |
TemplateData[edit source]
Displays Western Digital SMART attributes. This template is suitable for all Western Digital native drives released since 2003.
| Parameter | Description | Type | Status | |
|---|---|---|---|---|
| Enable HP attributes | enable_hp | If set to "yes", displays attributes that only show on HP OEM drives.
| String | optional |
| Enable 0xBF | enable_0xbf | If set to "yes", and either enable_hp, enable_dell or enable_acer is set to "yes", displays 0xBF.
| String | optional |
| Disable ramp-loading | disable_ramp | If set to "yes", disables 0xC0 and 0xC1, which are only tracked by ramp-loading drives.
| String | optional |
| Disable 0xC2 for HP | disable_0xc2_for_hp | If set to "yes", and "enable_hp" is also set to "yes", adds a note to the 0xC2 row that the attribute is not tracked by HP OEM drives.
| String | optional |
| Enable Dell attributes | enable_dell | If set to "yes", enables attributes only tracked by Dell OEM drives.
| Unknown | optional |
| Enable 0xFE for Dell | enable_0xfe | If set to "yes", adds 0xFE Free Fall Protection. This comes with a note that the attribute is only availabe on Dell OEM models, which can be disabled with enable_0xfe_universal.
| String | optional |
| Enable 0xFE universally | enable_0xfe_universal | If set to "yes", disables the note that 0xFE is only available on Dell OEM models.
| String | optional |
| Enable base Lenovo attributes | enable_lenovo | Enables 0xF0, which is added by Lenovo OEM drives. See also enable_lenovo_new, which controls additional attributes added by new Lenovo drives on top of 0xF0.
| String | optional |
| Enable newer Lenovo attributes | enable_lenovo_new | Enable Lenovo attributes that are added in addition to those controlled by enable_lenovo on drive models released since 2018.
| String | optional |