Template:Western Digital SMART attributes: Difference between revisions
From Australian Enthusiasts Wiki
Change to use Template:Yesno |
Add two levels of Lenovo attributes, plus consistently use "OEM drives" not the misleading "OEM models" |
||
| (One intermediate revision by the same user not shown) | |||
| Line 8: | Line 8: | ||
|0x0A = Spin Retry Count | |0x0A = Spin Retry Count | ||
|0x0B = Recalibration Retries | |0x0B = Recalibration Retries | ||
|0x0C = Power Cycle Count | |0x0C = Power Cycle Count | ||
|0xC0 = {{Yesno|{{{disable_ramp|}}}|no = Power-off Retract Count}} | |0xB7 = {{Yesno|{{{enable_hp|}}}|yes = SATA Downshift Error Count (only available on HP OEM drives)}} | ||
|0xC1 = {{Yesno|{{{disable_ramp|}}}|no = Load/Unload Cycle Count}} | |0xB8 = {{Yesno|{{{enable_hp|}}}|yes = End-to-End Error (only available on HP OEM drives)}} | ||
|0xC2 = Temperature {{Yesno|{{{disable_0xc2_for_hp|}}}|yes = (not available on HP OEM | |0xBB = {{Yesno|{{{enable_hp|}}}{{{enable_lenovo_new|}}}|yes = Reported Uncorrectable Errors (only available on {{Yesno|{{{enable_hp|}}}|yes = HP}}{{#ifeq: {{Yesno|{{{enable_hp|}}}|yes = Yes}}|{{Yesno|{{{enable_lenovo_new|}}}|yes = Yes}}| or |}}{{Yesno|{{{enable_lenovo_new|}}}|yes = Lenovo}} OEM drives)}} | ||
|0xBC = {{Yesno|{{{enable_hp|}}}|yes = Command Timeout (only available on HP OEM drives)}} | |||
|0xBE = {{Yesno|{{{enable_hp|}}}|yes = Airflow Temperature (only available on HP OEM drives)}} | |||
|0xBF = {{Yesno|{{{enable_0xbf|}}}|yes = G-Sense Error Rate (only available on some OEM drives)}} | |||
|0xC0 = {{Yesno|{{{disable_ramp|}}}|yes = |no = Power-off Retract Count}} | |||
|0xC1 = {{Yesno|{{{disable_ramp|}}}|yes = |no = Load/Unload Cycle Count}} | |||
|0xC2 = Temperature {{Yesno|{{{disable_0xc2_for_hp|}}}|yes = (not available on HP OEM drives)}} | |||
|0xC4 = Reallocation Event Count | |0xC4 = Reallocation Event Count | ||
|0xC5 = Current Pending Sector Count | |0xC5 = Current Pending Sector Count | ||
| Line 23: | Line 23: | ||
|0xC7 = UltraDMA CRC Error Count | |0xC7 = UltraDMA CRC Error Count | ||
|0xC8 = Write Error Rate | |0xC8 = Write Error Rate | ||
|0xF0 = {{Yesno|{{{enable_dell|}}}|yes = Head Flying Hours (only available on Dell OEM | |0xCE = {{Yesno|{{{enable_lenovo_new|}}}|yes = Flying Height (only available on Lenovo OEM drives)}} | ||
|0xF1 = {{Yesno|{{{enable_dell|}}}|yes = Total Host Writes (only available on Dell OEM | |0xF0 = {{Yesno|{{{enable_dell|}}}{{{enable_lenovo|}}}|yes = Head Flying Hours (only available on {{Yesno|{{{enable_dell|}}}|yes = Dell}}{{#ifeq: {{Yesno|{{{enable_dell|}}}|yes = Yes}}|{{Yesno|{{{enable_lenovo|}}}|yes = Yes}}| or |}}{{Yesno|{{{enable_lenovo|}}}|yes = Lenovo}} OEM drives)}} | ||
|0xF2 = {{Yesno|{{{enable_dell|}}}|yes = Total Host Reads (only available on Dell OEM | |0xF1 = {{Yesno|{{{enable_dell|}}}|yes = Total Host Writes (only available on Dell OEM drives)}} | ||
|0xFE = {{Yesno|{{{enable_0xfe|}}}|yes = Free Fall Protection {{#if: {{{enable_0xfe_universal|}}}||(only available on Dell OEM | |0xF2 = {{Yesno|{{{enable_dell|}}}|yes = Total Host Reads (only available on Dell OEM drives)}} | ||
|0xFE = {{Yesno|{{{enable_0xfe|}}}|yes = Free Fall Protection {{#if: {{{enable_0xfe_universal|}}}||(only available on Dell OEM drives)}}}} | |||
}}<noinclude>{{Documentation}}</noinclude> | }}<noinclude>{{Documentation}}</noinclude> | ||
Latest revision as of 10:54, 9 January 2023
| ID | Name |
|---|---|
| 0x01/1 | Read Error Rate |
| 0x03/3 | Spin-Up Time |
| 0x04/4 | Start/Stop Count |
| 0x05/5 | Reallocated Sectors Count |
| 0x07/7 | Seek Error Rate |
| 0x09/9 | Power-On Hours |
| 0x0A/10 | Spin Retry Count |
| 0x0B/11 | Recalibration Retries |
| 0x0C/12 | Power Cycle Count |
| 0xC0/192 | Power-off Retract Count |
| 0xC1/193 | Load/Unload Cycle Count |
| 0xC2/194 | Temperature |
| 0xC4/196 | Reallocation Event Count |
| 0xC5/197 | Current Pending Sector Count |
| 0xC6/198 | Uncorrectable Sector Count |
| 0xC7/199 | UltraDMA CRC Error Count |
| 0xC8/200 | Write Error Rate |
Template documentation (for the above template, sometimes hidden or invisible)
TemplateData[edit source]
Displays Western Digital SMART attributes. This template is suitable for all Western Digital native drives released since 2003.
| Parameter | Description | Type | Status | |
|---|---|---|---|---|
| Enable HP attributes | enable_hp | If set to "yes", displays attributes that only show on HP OEM drives.
| String | optional |
| Enable 0xBF | enable_0xbf | If set to "yes", and either enable_hp, enable_dell or enable_acer is set to "yes", displays 0xBF.
| String | optional |
| Disable ramp-loading | disable_ramp | If set to "yes", disables 0xC0 and 0xC1, which are only tracked by ramp-loading drives.
| String | optional |
| Disable 0xC2 for HP | disable_0xc2_for_hp | If set to "yes", and "enable_hp" is also set to "yes", adds a note to the 0xC2 row that the attribute is not tracked by HP OEM drives.
| String | optional |
| Enable Dell attributes | enable_dell | If set to "yes", enables attributes only tracked by Dell OEM drives.
| Unknown | optional |
| Enable 0xFE for Dell | enable_0xfe | If set to "yes", adds 0xFE Free Fall Protection. This comes with a note that the attribute is only availabe on Dell OEM models, which can be disabled with enable_0xfe_universal.
| String | optional |
| Enable 0xFE universally | enable_0xfe_universal | If set to "yes", disables the note that 0xFE is only available on Dell OEM models.
| String | optional |
| Enable base Lenovo attributes | enable_lenovo | Enables 0xF0, which is added by Lenovo OEM drives. See also enable_lenovo_new, which controls additional attributes added by new Lenovo drives on top of 0xF0.
| String | optional |
| Enable newer Lenovo attributes | enable_lenovo_new | Enable Lenovo attributes that are added in addition to those controlled by enable_lenovo on drive models released since 2018.
| String | optional |