Template:Western Digital SMART attributes

ID	Name
0x01/1	Read Error Rate
0x03/3	Spin-Up Time
0x04/4	Start/Stop Count
0x05/5	Reallocated Sectors Count
0x07/7	Seek Error Rate
0x09/9	Power-On Hours
0x0A/10	Spin Retry Count
0x0B/11	Recalibration Retries
0x0C/12	Power Cycle Count
0xC0/192	Power-off Retract Count
0xC1/193	Load/Unload Cycle Count
0xC2/194	Temperature
0xC4/196	Reallocation Event Count
0xC5/197	Current Pending Sector Count
0xC6/198	Uncorrectable Sector Count
0xC7/199	UltraDMA CRC Error Count
0xC8/200	Write Error Rate

Template documentation (for the above template, sometimes hidden or invisible)

TemplateData

Displays Western Digital SMART attributes. This template is suitable for all Western Digital native drives released since 2003.

Template parameters[Edit template data]

This template prefers inline formatting of parameters.

Parameter		Description	Type	Status
Enable HP attributes	enable_hp	If set to "yes", displays attributes that only show on HP OEM drives. Suggested values yes no	String	optional
Enable 0xBF	enable_0xbf	If set to "yes", and either enable_hp, enable_dell or enable_acer is set to "yes", displays 0xBF. Suggested values yes no	String	optional
Disable ramp-loading	disable_ramp	If set to "yes", disables 0xC0 and 0xC1, which are only tracked by ramp-loading drives. Suggested values yes no	String	optional
Disable 0xC2 for HP	disable_0xc2_for_hp	If set to "yes", and "enable_hp" is also set to "yes", adds a note to the 0xC2 row that the attribute is not tracked by HP OEM drives. Suggested values yes no	String	optional
Enable Dell attributes	enable_dell	If set to "yes", enables attributes only tracked by Dell OEM drives. Suggested values yes no	Unknown	optional
Enable 0xFE for Dell	enable_0xfe	If set to "yes", adds 0xFE Free Fall Protection. This comes with a note that the attribute is only availabe on Dell OEM models, which can be disabled with enable_0xfe_universal. Suggested values yes no	String	optional
Enable 0xFE universally	enable_0xfe_universal	If set to "yes", disables the note that 0xFE is only available on Dell OEM models. Suggested values yes no	String	optional
Enable base Lenovo attributes	enable_lenovo	Enables 0xF0, which is added by Lenovo OEM drives. See also enable_lenovo_new, which controls additional attributes added by new Lenovo drives on top of 0xF0. Suggested values yes no	String	optional
Enable newer Lenovo attributes	enable_lenovo_new	Enable Lenovo attributes that are added in addition to those controlled by enable_lenovo on drive models released since 2018. Suggested values yes no	String	optional

Transcluded from Template:Western Digital SMART attributes/doc (Edit • Purge • How does this work?)